AUP Series Submersible Water Pumps
· Stainless Steel Motor Housing
· Fiberglass Reinforced Engineering Composite Body
· Detachable Base Strainer
· Non-Clog Vortex Impeller For Free Passage of Large Solids & Fibers
· Continuous Duty Submersible Pump
VORTEX IMPELLER FOR TOUGH-TORQUE FLOW
Real Non-Clog performing volute impeller made of Fiberglass Reinforced Plastic (FRP) provides continuous operation with minimum abrasive wear and eliminates clogging and binding. Pumping is accomplished by induced high speed vortex which increase fluid pressure and minimize particle contact or entanglement of fibrous matter in wastewater and sludge.
Dual use effluent and sewage handling design. Protect against damage from passing large rocks or metal objects. Safe guard for frog and fish.
LARGE SOLID HANDLING PASSAGE
For heavily polluted wastewater containing slender matter, long fibers and small or large solid particles.
Suspended solids handling capacity: 35 mm (1.38 inch) in diameter
ABRASION AND CORROSION RESISTANT
Pump casing made of 304 stainless steel and fiberglass-reinforced engineering composite. The materials are strong and lightweight with high resistance to rust, corrosion, abrasion and impact.
Motor housing: Stainless steel - corrosion resistant and good heat dissipation.
Motor: Oil free (air filled electric induction motor).
Designed for durable continuous operation.
HIGH QUALITY MECHANICAL SEALS
Double Silicon Carbide mechanical seals (impeller side) in lubricant chamber. SiC provide greater hardness (approaching diamond), withstanding of pumping pressure, corrosion and abrasion resistant, self-lubrication and temperature fluctuation tolerance.
BUILT-IN OVERLOAD & THERMAL PROTECTION
Self-resetting automatic protection for motor against overload or overheat conditions
|Model||Motor Rating||Max Flow||Max Head|
|AUP-150||1/4 HP||3000 GPH||22'|
|AUP-250||1/3 HP||4200 GPH||29'|
|AUP-400||1/2 HP||5500 GPH||39'|
|AUP-750||1 HP||6300 GPH||49'|